Falcon Shocks by Teraflex – Teraflex Europe

amortisseurs-falcon-teraflex-europe

The Falcon Series 2.1 monotube shock is designed to deliver the performance and handling requirements of the Jeep Wrangler in a compact and affordable package. The shock features an increase in stability and ride quality while maintaining comfort, perfect for daily driven Jeeps. This Sport version of the Series 2 shock provides more aggressive off-road handling with increased compression damping, ideal for the serious enthusiast wanting a consistently firm feel through all driving conditions.

The 6061 hard anodized aluminum body protects the internal components from damage and provides superior heat dissipation for consistent performance. The single tube design incorporates the oil/gas separator to prevent cavitation during rapid shock cycling. Falcon Shocks feature Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures and reduce shock fade. The proprietary synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.

 

Features & Benefits

• JK specific shock
• Increases vehicle stability
• Improved dynamic roll control & low speed damping
• Optimized fitment for clearance during full suspension travel
• Front offset stud design creates additional frame clearance during articulation
• 2.25” shock body provides optimal performance
• Largest shock body that will fit without modifications
• 6061 hard anodized aluminum shock body resists wear
• Smooth honed internal shock body surface for long term performance
• 3/4” shaft to prevent shaft buckling
• Maximum shaft diameter for optimal adjustable range when Upgrade Kits installed
• Hard chrome, induction hardened shaft resists rock damage & corrosion
• OGS – the oil/gas separator prevents cavitation
• Digressive linear piston
• One-piece Teflon bronze piston wear band with O-ring
• Hard anodized billet piston
• Aluminum construction for superior heat dissipation
• Red Line full synthetic shock oil
• 1,000 hour salt spray corrosion resistance test on all hardware
• Serviceable & rebuildable (factory serviced)
• Built in-house at the TeraFlex Falcon Shock Division
• 3 year warranty
• Patent pending design

Amortisseur Falcon by Teraflex pour Jeep JK

The Falcon Series 3.1 piggyback shock is designed and engineered to deliver race inspired performance and handling while exclusively built to the specific requirements of the Jeep Wrangler. Vehicle stability is the paramount goal with all Falcon Shocks.

For years shocks have been simply ‘adapted’ with minimal tuning and not specifically designed for an application. Falcon Shocks change that mentality. The Falcon Series 3 Piggyback shocks are corner specific, built from the ground up, and deliver the best damping characteristics possible with fitment and function outlining the highest priorities. A lengthy and painstaking development process has finally delivered these new advancements to a waiting Jeep market.

The front shock features a unique piggyback design with the reservoir positioned horizontally to increase clearance with large tires during articulation and turning. An offset upper stud positions the shock body away from the frame for maximum clearance.

The rear shock positions the body and reservoir at the bottom to eliminate shaft damage from rocks kicked up by the tires. The outboard mounting increases clearance for lifted vehicles with raised track bar brackets.

Falcon Shocks feature Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures and reduce shock fade. The proprietary synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.

Features & Benefits

• JK specific shock
• Increases vehicle stability
• Improved dynamic roll control & low speed damping
• Optimized fitment for clearance during full suspension travel
• Front offset stud design creates additional frame clearance during articulation
• 2.25” shock body provides optimal performance
• Largest shock body that will fit without modifications
• 6061 hard anodized aluminum shock body resists wear
• Smooth honed internal shock body surface for long term performance
• 3/4” shaft to prevent shaft buckling
• Maximum shaft diameter for optimal adjustable range when Upgrade Kits installed
• Hard chrome, induction hardened shaft resists rock damage & corrosion
• OGS – the oil/gas separator prevents cavitation
• Digressive linear piston
• One-piece Teflon bronze piston wear band with O-ring
• Upgrade to 3.2 or 3.3 via Adjustable Cartridge Upgrade Kits for quick compression adjustments (sold separately)
• Piggyback design increases fluid flow by 6x over restricting reservoir hose designs
• Piggyback fluid passage eliminates common leakage issues found in banjo & swivel fittings
• Hard anodized billet piston
• Aluminum construction for superior heat dissipation
• Red Line full synthetic shock oil
• 1,000 hour salt spray corrosion resistance test on all hardware
• Serviceable & rebuildable (factory serviced)
• Built in-house at the TeraFlex Falcon Shock Division
• 3 year warranty
• Patent pending design

The Falcon Series 3.3 piggyback shock is designed and engineered to deliver race inspired performance and handling while exclusively built to the specific requirements of the Jeep Wrangler. Vehicle stability is the paramount goal with all Falcon Shocks.

For years shocks have been simply ‘adapted’ with minimal tuning and not specifically designed for an application. Falcon Shocks change that mentality. The Falcon Series 3 piggyback shocks are corner specific, built from the ground up, and deliver the best damping characteristics possible with fitment and function outlining the highest priorities. A lengthy and painstaking development process has finally delivered these new advancements to a waiting Jeep market.

Series 3.3 shocks feature a three position fast adjust knob, with the middle setting incorporating an 8 position micro adjust dial. The fast adjust knob will provide damping settings for everything from soft to very firm.

The front shock features a unique piggyback design with the reservoir positioned horizontally to increase clearance with large tires during articulation and turning. An offset upper stud positions the shock body away from the frame for maximum clearance.
The rear shock positions the body and reservoir at the bottom to eliminate shaft damage from rocks kicked up by the tires. The outboard mounting increases clearance for lifted vehicles with raised track bar brackets.

Falcon Shocks feature Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures and reduce shock fade. The proprietary synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.

Features & Benefits

• JK 4 Door specific shock
• Increased vehicle stability
• Improved dynamic roll control & low speed damping
• Optimized fitment for clearance during full suspension travel
• Front offset stud design creates additional frame clearance during articulation
• 2.25” shock body provides optimal performance
• Largest shock body that will fit without modifications
• 6061 hard anodized aluminum shock body resists wear
• Smooth honed internal shock body surface for long term performance
• 3/4” shaft to prevent shaft buckling
• Maximum shaft diameter for optimal adjustable range
• Hard chrome, induction hardened shaft resists rock damage & corrosion
• OGS – the oil/gas separator prevents cavitation
• Digressive linear piston & base valve technology
• One-piece Teflon bronze piston wear band with O-ring
• Fast Adjust knob with 3 compression settings for large damping adjustments
• Micro position dial with 8 compression settings for finer damping adjustments
• Piggyback design increases fluid flow by 6x over restricting reservoir hose designs
• Piggyback fluid passage eliminates common leakage issues found in banjo & swivel fittings
• Hard anodized billet piston
• Aluminum construction for superior heat dissipation
• Red Line full synthetic shock oil
• 1,000 hour salt spray corrosion resistance test on all hardware
• Serviceable & rebuildable (factory serviced)
• Built in-house at the TeraFlex Falcon Shock Division
• 3 year warranty
• Patent pending design

The Falcon Nexus Equal Force (EF) stabilizer has been explicitly and uniquely engineered for the JK Wrangler to provide balanced and controlled side-to-side steering response, with a properly weighted steering feel. This is accomplished by delivering consistent bi-directional turning force, and equal return to center dynamics. The Nexus EF stabilizer features a 2.125” diameter 6061 hard anodized aluminum body with low profile body cap optimized for maximum clearance and unobstructed suspension travel. The patent pending stabilizer design maintains smooth movement under extended and rapid turning maneuvers, as the integrated oil/gas separator maximizes performance by preventing cavitation.

Falcon Shocks feature Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures and reduce shock fade. The proprietary synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.

Features & Benefits
• JK specific stabilizer
• Equal force side-to-side resistance for consistent steering wheel response
• Allows for balanced return to center equilibrium
• No shaft displacement issues (no external reservoir required)
• Inline oil/gas separator prevents cavitation
• Smooth honed internal shock body surface for long term performance
• 5/8” hard chrome, induction hardened shaft resists rock damage & corrosion
• One-piece Teflon bronze piston wear band with O-ring
• Optimized fitment for clearance during full suspension travel & articulation
• Fast Adjust knob (2.2 model) for quick compression adjustments
• OEM style sealed rod end joint mounting provides direct responsiveness
• Red Line full synthetic shock oil
• 1,000 hour salt spray corrosion resistance test on all hardware
• Built in-house at the TeraFlex Falcon Shock Division
• 3 year warranty
• Patent pending design

This page is also available in: frFrançais (French)

Privacy Preference Center

Strictly Necessary

These cookies are essential for websites built on Wordpress to perform their basic functions. These include those required to allow registered users to authenticate and perform account related functions.

wordpress_test_cookie, wordpress_{hash}, wordpress_logged_in_{hash}, wp-settings-{user_id}, wp_sharing_{id}

Close your account?

Your account will be closed and all data will be permanently deleted and cannot be recovered. Are you sure?