Jeep JK/JKU HD Dana 30/44 Upper and Lower Ball Joint Kit w/out Knurl Pair 07-18 Wrangler JK/JKU TeraFlex
220,40€ TVA incluse
Jeep JK/JKU HD Dana 30/44 Upper and Lower Ball Joint Kit w/out Knurl Pair 07-18 Wrangler JK/JKU TeraFlex – Teraflex Europe – Direct import from the USA
TeraFlex JK/JKU Heavy-Duty Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Without knurl.
Fits:
- JK Wrangler (2-door) w/Dana 30 or Dana 44 axle
- JKU Wrangler Unlimited (4-door) w/Dana 30 or Dana 44 axle
Includes:
- Upper ball joints w/out knurl – single
- Lower ball joints w/out knurl – single
- Sold As A Set (For one side)
Upper Ball Joint Features:
- Extremely hard sintered wear bushings to handle extreme side load demands w/out failure
- Magnesium Phosphate coating to inhibit corrosion throughout
- Heat treated 4140 chromoly ball/stud and 1045 carbon steel housing
- Factory style serrated flange nut and grease fitting
- W/out knurls
Lower Ball Joint Features:
- Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection
- Wear plate features grease channels for increased flow through entire joint ensuring longevity and predictable operation
- Magnesium Phosphate coating to inhibit corrosion and friction throughout
- Heat treated 4140 chromoly ball/stud
- Huge 30mm (1.18 inch) ball
- Factory style serrated flanged castle nut
- Ball joint pre-load adjustability provides the end user w/ near effortless wear adjustment (kit includes Preload Adjustment Tool)
- Low-profile single lip dust seal eliminates torn conventional dust boot concerns
- Adjustable ball stud retaining ring for accurate initial and future preload adjustments that can be done w/out any axle disassembly
- Adjustable preload can be performed w/ simple hand tools
- Adjustable end cap w/ (2) zerk fittings (Frog Eye) allow greasing access from either side w/out axle shaft removal
- Dual helical grease grooves machined in the retaining ring allow spent grease to exit through the low-profile seal
- Low-profile seal prevents contaminants. while allowing spent grease to evacuate from the ball joint
- W/out knurls
Note:
- We recommend ball joints w/out knurls (P/N 3442002) or (P/N 3440000) as they will not score the inner knuckle and open up the bore.
- Also offered w/ knurls (P/N 3442022) for ball joints w/ a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.
- Install Time: 4 Hours
- SKU: 3440000
– TERA 3440000
Fitment: 2007,2010,Jeep,Wrangler,X|2007,2017,Jeep,Wrangler,Unlimited Rubicon|2007,2017,Jeep,Wrangler,Rubicon|2007,2010,Jeep,Wrangler,Unlimited X|2007,2017,Jeep,Wrangler,Sahara|2007,2017,Jeep,Wrangler,Unlimited Sahara|2010,2017,Jeep,Wrangler,Unlimited Sport|2010,2017,Jeep,Wrangler,Sport|2011,2011,Jeep,Wrangler,70th Anniversary|2011,2011,Jeep,Wrangler,Unlimited 70th Anniversary|2016,2016,Jeep,Wrangler,75th Anniversary|2016,2016,Jeep,Wrangler,Sport S|2016,2016,Jeep,Wrangler,Unlimited Sport S|2016,2016,Jeep,Wrangler,Unlimited 75th Anniversary|2018,2018,Jeep,Wrangler JK,Unlimited Rubicon|2018,2018,Jeep,Wrangler JK,Sport|2018,2018,Jeep,Wrangler JK,Unlimited Sahara|2018,2018,Jeep,Wrangler JK,Sahara|2018,2018,Jeep,Wrangler JK,Unlimited Sport|2018,2018,Jeep,Wrangler JK,Rubicon
Doors: 4 Door|2 Door
Location: Front
Lift:
Tire size max:
Includes Shocks:
Installation Time:
Material: 4140 Chromoly/1045 Carbon Steel
UPC Code: 843885031239
Last Update: 2022-07-08 15:26:49
Installation instruction : download
Informations complémentaires
Poids | 1.27 kg |
---|---|
Dimensions | 20.32 × 8.89 × 6.35 cm |
Avis
Il n’y a pas encore d’avis.