Jeep JL Stroke Speed Bump 3 Inch and Progressive Bump Stop Kit Front and Rear 4.5 Inch Lift For 10-Pres Wrangler JL TeraFlex - Teraflex Europe
Jeep JL Stroke Speed Bump 3 Inch and Progressive Bump Stop Kit Front and Rear 4.5 Inch Lift For 10-Pres Wrangler JL TeraFlex

Jeep JL Stroke Speed Bump 3 Inch and Progressive Bump Stop Kit Front and Rear 4.5 Inch Lift For 10-Pres Wrangler JL TeraFlex

980,20 TVA incluse

Jeep JL Stroke Speed Bump 3 Inch and Progressive Bump Stop Kit Front and Rear 4.5 Inch Lift For 10-Pres Wrangler JL TeraFlex – Teraflex Europe – Direct import from the USA

UGS : TERA 1958350 Catégories : , , , Étiquettes : ,
000

TeraFlex Bump Stop Kits add additional protection to your suspension over the factory bump stops. which can deform during hard compression and suspension movement. Our innovative bump stops meet the demand of high-performance driving.

Composite construction combined with a progressive nature reduces suspension compression impacts and harshness when bottoming out whether driving off-road or on poorly maintained highways. Reducing this impact increases driver ability to maintain vehicle control as well as reduces the risk of bending an axle housing tube.

These maintenance-free bump stops don’t require any adjustment or tuning. SpeedBump Bump Stops feature a self-lubricating Delrin acetal resin polymer shaft to withstand 1.000s of continuous cycles without wear or abrasion. The external shaft seal also prolongs shaft life by wiping and cleaning the shaft to prevent contaminants from entering the SpeedBump housing.

Foam Progressive Bump Stops are constructed from a performance-tuned high-density closed-cell nitrogen charged microcellular polyurethane technology that will not fade or dissipate under extended heavy use to maintain its progressive nature. This material is unaffected by temperature extremes and retains its flexibility under thermal or sub-zero temperatures.

These bump stops are a full 1.5 inch longer than stock. Proper bump stop length and/or bump stop strike pad height is crucial for preventing damage to axle housing tubes. suspension components. shock absorbers. and fenders. Front and rear bump stops feature a simple bolt-on installation.

SpeedBump Front Bump Stops simply require removal of the factory bump stop bell. Progressive Bump Stops simply pop-in to the existing factory locations. SpeedBump Lower Bump Stop Strike Pads feature a simple bolt-on installation.

Features:

  • JL specific tuned for high-speed performance
  • Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology
  • Absorbs large impact energy progressively during compression to prevent bent axle tubes
  • Prevents damage to suspension components. shock absorbers. and fenders
  • Quiet movement and function (no pad-slap clunk)
  • Maintains progressive nature during all conditions
  • Will not fade or dissipate under extended heavy use
  • Unaffected by temperature extremes – retains flexibility in thermal or subzero temps
  • Resistant to all types of environmental conditions (mud. salt. sand. dust. etc.)
  • Subzero temperature flexibility reduces fatigue
  • Compatible w/ all suspension systems that retain factory axle spring mounting locations
  • Maintenance-free. all composite construction
  • Simple installation – no welding required
  • Patented technology
  • Limited lifetime warranty

Fits:

  • JL Wrangler (2-door)
  • JL Wrangler Unlimited (4-door)

Includes:

  • 3 inch-Stroke SpeedBump Front Bump Stop Kit (part number 1958325)
  • 1.25 inch SpeedBump Bump Stop Pad Kit – Front Lower (part number 1467125) – 3 pair
  • 0.25 inch Adjustment spacers – 2 pair
  • All necessary hardware
  • Foam Progressive Bump Stops – rear – pair
  • 2 inch bump stop strike pads – rear – pair
  • 0.5 inch bump stop strike pad shims – rear – 4 pair
  • Rear bump stop bracket mounting plate – pair
  • Rear bump stop bracket mounting strap – pair
  • All necessary hardware

– TERA 1958350


Fitment: 2007,2010,Jeep,Wrangler,X|2007,2010,Jeep,Wrangler,Unlimited X|2007,2021,Jeep,Wrangler,Unlimited Sahara|2007,2021,Jeep,Wrangler,Rubicon|2007,2021,Jeep,Wrangler,Unlimited Rubicon|2007,2017,Jeep,Wrangler,Sahara|2010,2021,Jeep,Wrangler,Sport|2010,2021,Jeep,Wrangler,Unlimited Sport|2011,2011,Jeep,Wrangler,Unlimited 70th Anniversary|2011,2011,Jeep,Wrangler,70th Anniversary|2016,2016,Jeep,Wrangler,Unlimited Sport S|2016,2016,Jeep,Wrangler,Unlimited 75th Anniversary|2016,2016,Jeep,Wrangler,Sport S|2016,2016,Jeep,Wrangler,75th Anniversary|2018,2018,Jeep,Wrangler JK,Sport|2018,2018,Jeep,Wrangler JK,Unlimited Sport|2018,2018,Jeep,Wrangler JK,Unlimited Sport S|2018,2018,Jeep,Wrangler JK,Unlimited Sahara|2018,2018,Jeep,Wrangler JK,Unlimited Rubicon|2018,2018,Jeep,Wrangler JK,Rubicon|2018,2019,Jeep,Wrangler,Unlimited Moab|2018,2018,Jeep,Wrangler JK,Sport S|2018,2018,Jeep,Wrangler JK,Sahara|2018,2021,Jeep,Wrangler,Sport S|2018,2021,Jeep,Wrangler,Unlimited Sport S|2021,2021,Jeep,Wrangler,80th Anniversary|2021,2021,Jeep,Wrangler,Willys|2021,2021,Jeep,Wrangler,Unlimited Willys Sport|2021,2021,Jeep,Wrangler,Willys Sport|2021,2021,Jeep,Wrangler,Unlimited Willys|2021,2021,Jeep,Wrangler,Islander|2021,2021,Jeep,Wrangler,Unlimited Sport Altitude|2021,2021,Jeep,Wrangler,Freedom|2021,2021,Jeep,Wrangler,Unlimited Sahara Altitude|2021,2021,Jeep,Wrangler,Unlimited Rubicon 392|2021,2021,Jeep,Wrangler,Unlimited High Altitude|2021,2021,Jeep,Wrangler,Unlimited Freedom|2021,2021,Jeep,Wrangler,Unlimited 80th Anniversary|2021,2021,Jeep,Wrangler,Unlimited Islander

Doors:

Location: Front|Rear

Lift: 4,5 Inch

Tire size max:

Includes Shocks:

Installation Time:

Material:

UPC Code:

Last Update: 2022-07-08 15:28:17


Installation instruction : download

Informations complémentaires

Poids 5.44 kg
Dimensions 33.02 × 27.94 × 17.78 cm